Three Accessories You May Want To Rent Or Buy Along With Your Air Compressor Rental

Posted by on May 2, 2016 in Uncategorized |

When you rent an air compressor, the tank, valve, gauge and hose are standard air compressor parts. You may not think about what else you could use or might need to accomplish the jobs at hand. However, there are several accessories you may want to rent or buy at the same time you rent an air compressor. Three accessories and what you might need them for are as follows. Retractable Air Hose Reel with Auto-Rewind Air compressors, despite the fact that they are filled with air, tend to be very heavy. As such, you will want to park the compressor as close to the area where it will be used, and then extend the hose as far as it will reach. The standard hoses on most compressor rentals do not reach very far, so to make up for the vast expanse between you and the compressor, you can buy or rent a retractable air hose reel with auto-rewind features. One connection on the reel replaces the standard hose’s connection to the compressor tank. The opposite end of the hose on the reel becomes the exit point for the compressed air and can be pulled out several yards beyond the tank. When you let go of the rewind hose, it automatically springs back so that no one is crossing over the hose and tripping on it. Additional Couplers of Varied Sizes Some tools that require an air compressor to work have unusual couplings. These couplings may be very different from the couplers that are on the end of your compressor rental. Because of this, you will need to buy couplers that can connect to the end of the compressor’s hose and then connect to your tools. Be sure to ask the rental store about extra couplers, and know which tools you intend to connect to the compressor so that the store can help you find the correct-sized couplers. Air Chuck (Air Release Extension) If your project has some tight spaces and it is difficult to get the compressor hose into position so that you can release the air, you may want to rent or buy an air chuck. This metal extension for the compressor hose reaches farther down or up inside narrow spaces than your own hands can. It closely resembles a long-handled ratchet wrench. When the end extends to where you want to release the compressed air, a light pressure on the head is all that is needed. For more information and options of accessories, talk with a company that sells or rents air compressor parts, such as Kruman Equipment...

Read More

3 Reasons To Consider Alloy 20

Posted by on Apr 2, 2016 in Uncategorized |

Alloy 20 is a fantastic resource that can be used for a wide variety of applications, mostly because of the durability of the material. Alloy 20 is a combination of steel, nickel, chromium, and molybdenum and is often used for everything from pipes to bars. Listed below are just a few of the reasons to consider utilizing alloy 20. Durability One of the biggest reasons to use an alloy 20 item is if you are at all worried about durability. Alloy 20 products can typically take a lot more punishment than other materials. For example, many materials will run into issues with corrosion when exposed to industrial applications that involve water, but alloy 20 is extremely resistant to corrosion. Another way that alloy 20 is quite durable is its resistance to temperature shifts. The compounds used in alloy 20 serve to greatly insulate the pipes and their contents, which means that you can use these in just about any climate without having to worry about the temperature affecting the contents or damaging the pipes. Versatility Another reason to consider alloy 20 is that you do not have to worry as much about whether or not the pipes are going to be suitable or capable of dealing with your application. With other types of materials, you will run into issues where one type of pipe may be suitable for food but not suitable for acids or acidic compounds. However, an alloy 20 pipe can handle just about anything that you can throw at it, which means that you can use it for a large number of different applications. Cost-Effective Finally, you will want to consider utilizing alloy 20 for your application because it is going to be cost-effective when compared to some of the other materials on the market. Sure, alloy 20 pipes and bars will often cost quite a bit more upfront than regular steel bars or pipes, but they will end up saving you quite a bit of money in the end. While those normal steel bars or pipes may be less expensive now, they will only last a fraction of the time that an alloy 20 item would. This means that you will have to buy and replace other types of pipes and bars multiple times before you even begin to notice an issue with the alloy 20 items. Contact your local industrial supply store or dealer today in order to discuss if alloy 20 is a good fit for your budget and application. This material is a great choice because it is very durable, can be used in a lot of different ways, and is cost-effective. Contact a company like Tiger Metals, Inc. for more...

Read More

Understanding The Benefits Of Installing Automatic Driveway Gates

Posted by on Feb 21, 2016 in Uncategorized |

If you are upgrading features around your yard and driveway, you might have thought about buying an automatic gate to put at the end of the driveway. You may even find yourself wondering if the significant investment is really worthwhile. Automatic driveway gates are a great choice for many reasons. Here are a few reasons why you might want to have an automatic gate installed on your driveway. Enhance Property Security Installing an automatic gate is a great way to take control of your property security. When your driveway is blocked by a gate, you have complete control over who gains access and who does not. Not only can you secure the gate with a keypad and limit the people you give the code to, you can also install a speaker and camera for unannounced visitors. That allows you to see and talk with anyone who arrives before you grant them access to the house. The enhanced security may even save you money on your home insurance, because the insurance company will face less risk of liability or burglary claims if your property is secured against unauthorized access. Improve Property Value .When you add an automatic gate to your driveway, you may find that it increases the value of your property. You’ll want to talk with the county appraiser once you’ve had the gate and fence installed, because a new appraisal will reflect those improvements. Protect Pets Automatic gates are also a great way to protect your pets. The gate will help to keep your pets inside, because automatic gates aren’t as easy to dig around or sneak under as a regular wooden gate and fence. Another thing that some homeowners aren’t aware of is the prevalence of animal theft. If you have a fence with a simple gate, it’s easy to access your property to steal your pet if you aren’t right there watching. By putting an automatic gate on the driveway, you make it much more difficult for anyone to steal your pets. In addition, it also helps to keep other people safe from your pets. If you have a dog that likes to jump or is prone to nervous biting, it’s in your best interest to keep them in an area that’s enclosed where you can regulate access to the property while your pets are outside. As you can see, automatic gates are a great investment. If you’re considering a gate purchase, talk with a local contractor like Incom Inc today about these benefits and...

Read More

2 Methods For Connecting Tubing And Quick Connect Fittings

Posted by on Jan 18, 2016 in Uncategorized |

PEX is a bendable type of plastic piping that uses a specialized chemical process to strengthen and toughen the pipe. Since it can withstand a wide array of different temperatures, many people are turning to it for their residential plumbing needs. One of the best parts of this piping is that you can easily connect it. Its flexibility allows the pipe to bend and shape around all of the corners in your home quickly and easily. You can connect the piping using push-to-connect technology or crimp rings.  If you opt to go with the compression method, you are going to need certain tools and a firm understanding of how to properly compress the ring to ensure the connection is nice and secure. On the other hand, the quick connect method doesn’t require prior experience or special tools to get the job done. To learn more about the two options, explore the information below. Push Connect Fitting Method If you are opting to install your PEX tubing using the push connect fittings, you are going to have to cut, clean and mark your tubing to prepare it for this method of connection. Instead of having to go out and buy a bunch of specialized tools to get the job done, you can simply push your fitting directly on the tubing until you hear it snap tight. This helps ensure you won’t have to deal with a bunch of leaks after application. It also prevents any over or under-tightening. PEX Crimping Fittings Those who don’t have experience using crimp rings might find this method far more complicated to do. You have to make sure the rings aren’t tightened too much or left too loose, otherwise, you end up with a bunch of leaks. When that happens, you have to start all over again. You still have to cut, clean and mark your tube. Then, you put the ring over your smooth end. Push your fitting in until it is resting securely against the edge. Push the crimp ring to within a quarter-inch of the pipe’s end to cover the fitting. Tighten by hand. You then use the crimping tool to tighten the ring and secure the connection. Be careful when tightening or you could damage the crimp and end up having to start all over again. By using one of the two methods above, you can secure your piping in no time. However, you need to choose the method that is going to work the best for you and your needs before embarking on the...

Read More

What To Look For In A Used Water Jet Cutting Machine For Your Custom Counterop Business

Posted by on Dec 16, 2015 in Uncategorized |

Water jet cutting is a unique and precise cutting tool for hard metals and granite. This machine uses abrasive substances mixed with high speeds of water force to make even, smooth cuts on surfaces that traditional saws and blades cannot cut through easily. A water jet cutter is very beneficial to your custom countertop business since the tool is able to cut through granite, marble, cement, and more without damaging the material. New water jet cutters can cost upwards of $60,000, which can make it difficult for you to acquire this machinery. You can, however, spend much less and buy a used variety that has lots of life left. Here are things you should look for when buying a used water jet cutter for your business. Accessories A used water jet cutter should come with a variety of nozzles for different cutting applications. It should also come with a working pump, water chiller, and water softener to make even flow and pressure more effective. When buying a used water jet cutting machine, make sure it has all the needed accessories to make it function so you can avoid having to buy these items after purchase. Pump hours A used car is often judged by how many miles it has driven, and a used water jet cutter is judged by how many hours are on the pump. The more pump hours a water jet cutter has used, the more natural wear and depreciation is has. When looking for a used water jet cutter, try to find a model that has less than a few hundred hours of pump use whether the pump has been refurbished or not. Warranty If you buy a used water jet cutter from a private seller, you may not get a warranty from your purchase. Since a water jet cutter is so expensive, you may want to buy one from a company that can guarantee its working condition for several months or hours. Choose a company that refurbishes these machines and then offers you a warranty or guarantee on its working ability so you can feel more confident about your purchase. A water jet cutter is a great attribute to your custom countertop business. When buying a used machine, you want to ensure any models you are considering come with accessories, the pump has few working hours on it, and the machine comes with a warranty or guarantee of some kind. With a bit of research, you can buy an excellent used machine at an affordable price (from companies like Cincinnati Ventilating Company Inc) to cut your custom countertops with beautiful...

Read More

Common Well Pump Repair Issues

Posted by on Nov 16, 2015 in Uncategorized |

If you live in the country (as opposed to in the city), you likely depend on a well for your home’s water supply. Unlike in generations past when water was brought to the surface of the well by a hand pump and carried to the house in a bucket, today’s wells are equipped with motorized pumps that deliver water right to your faucets without the labor involved in decades past. However, when the well pump breaks down, your water supply becomes inaccessible. While modern well pumps can last for 20 years or longer, they have many more mechanical parts than traditional hand pumps. If you rely on a well pump for your water, it’s a good idea to familiarize yourself with common well pump issues and how to fix them. Common well pump repair issues and how to fix them 1. No or little water pressure. No one wants to take a shower or wash dishes with just a slight trickle of water coming out of the faucet. If that’s what is happening when you turn on the water, you may only need to adjust the pressure switch. To do this, turn off of the electrical power to the pump. Then, find the air pressure tank atop of the well pump and attach a tire pressure gauge to the tank. This will allow you to measure the pressure and see if you need to adjust the switch. A pressure of 20 to 28 psi is normal for a well pump. If the pressure is less than that a quick adjustment with a wrench on the pressure switch can boost the pressure. 2. Short cycling. In well repair parlance, short cycling is when the well pump cuts off and on repeatedly. To the person trying to access the water, that means a surge of water from the faucet followed immediately by a trickle, followed again by a surge. 3. No water is coming out at all. If you turn on the faucet and get no water at all, it may be a problem with the power source. The first place you should look is to make sure that the circuit breaker hasn’t tripped and that the pump is getting electricity. 4. Discolored water. Discolored water is a sign of mineral deposits in the water. Depending on your part of the country, your well water could have traces of magnesium, iron or calcium. There are ways to filter and treat the water, depending on the type of mineral, so that the water won’t discolor your fixtures and/or look unappetizing in the glass. Well pump trouble can take many forms. If you have discolored water, low or absent water pressure or a...

Read More
Page 2 of 512345